*As an Amazon Associate we earn from qualifying purchases. The price to you remains the same.
You don’t need to be a woodworking enthusiast to find sawdust all over your house, including your carpet. Even the smallest renovation either at your place of residence or a close neighbor is capable of producing those annoying little particles that travel everywhere.
You might not even notice it in the early days. But a bit of hayfever-induced sniffles and fingerprints on common house surface will quickly provide the evidence. Sawdust has crept in and it is now all over the place!
To get rid of sawdust in your carpet, you’ll need a sturdy vacuum cleaner. A steam cleaner is also helpful for getting this material out of your floor’s fibers.
Step One: Check the Air Filters
If you think you’ve just got sawdust on your carpet – think again. Sawdust and construction dust can easily get into the air in your home. That lets your fans and AC systems spread the sawdust around and worsen the issue.
To get started getting sawdust out of your carpets, check the air filters in your house. These may have trapped sawdust in them. If they’re full of dust, they could continue blowing sawdust around your house and worsening the problem.
Step Two: Use an Air Scrubber
If after you clean your air ducts you’ve still got a lot of dust in the air, an air scrubber is a good idea. You can rent these from most local hardware stores.
Air scrubbers help you get rid of the sawdust that you kick up as you clean. Plus, they suction the sawdust particles out of the air to give you a fresh start for cleaning your carpets.
Step Three: Vacuum
Now it’s time to move on to tackling your carpets. The majority of the work will be done with your vacuum cleaner, as this will remove the most amount of sawdust from your carpets.
Start by adding an upholstery brush to the vacuum wand. Then, vacuum the tops of the walls and slowly work your way down to the baseboard. Work in sections and move the wand sideways across each section.
Once you’ve got all the dust off the walls, remove the covers of the vents and vacuum inside of them. Vacuum the window, door frames, and light fixtures in the room as well.
Then, use the beater brush to vacuum your carpets. You want to be as thorough as possible here, going over every part of the carpet.
Step Four: Steam Clean
Once you’ve got all the sawdust off your walls, baseboards, surfaces, and your carpets, it’s time to deep clean your floor. This is a critical part of the process because it helps get rid of the dust locked deep in your carpet’s fibers.
One of the best tools you can use for this stage of the cleaning process is a vacuum and steam cleaner machine. These devices can help suction the dirt out of the carpet all while getting deep into the fibers and cleaning them.
After you finish steam cleaning the carpet, allow the room to dry completely. This should take between eight and twelve hours.
Frequently Asked Questions
Will Sawdust Come Out of Carpet?
With a little bit of time and effort, sawdust will come out of your carpet. It’s best to have a powerful vacuum cleaner such as a shop vac to help you get all the sawdust out of your carpet. If you have a rug, you can also beat it off before using the above cleaning process.
What Is the Best Way to Clean up Sawdust?
The best way to clean up sawdust is to use an air scrubber. This helps remove any sawdust that’s floating around in your room and that could result in more dust getting into your carpet and perpetuating the problem.
What Is the Most Effective Cleaning Equipment in Removing Thick Accumulated Sawdust?
When it comes to removing thick layers of dust or sawdust your vacuum cleaner is your best friend. The more powerful the vacuum the easier it will be for you to get the particles out of your carpet. Keep in mind that an air scrubber can be an additional tool for removing sawdust from the air and ensuring your carpets don’t become dirty again.